Deep Foundations Specialist

 
 
Steel Screw Piling Benefits
  • Load bearing capacity is related to the installation torque, and this often reveals local soft spots in the site that would not be detected when boring for concrete piers.
  • Bored holes for concrete that collapse due to dry sand or a high water table are easily replaced with steel screw piers.
  • Load testing is easily carried out.
  • Steel screw piers can be used for underpinning, bridges; jetties; house, commercial & industrial building foundations; along easements; electricity and communications towers; boardwalks; pipelines; conveyer belt frames in mining.

Speed

  • Fast installation time during the vulnerable groundwork period gets your foundations out of the ground.
Light Weight Machinery
  • Less heavy machinery activity on site.

Piles In All Sizes

  • Piles are designed for the loads and ground conditions at your site.
    Piles range from 50 kN (5 t) to 2000 kN (200 t).

Low Set-up Costs

  • Lower set-up cost than deep bored & grouted piers.

Clean & Environmentally Friendly

  • No soil to remove from site
    No noise from hammered piles
    No vibration from hammered piles

Suitable In Acid Soils

All Work Done To AS2159

Engineering Certification At Job End
 

 

CLICK HERE
for more
Photos

 

 

These 2 photos show the effects of disturbing compressible soils in the Noosaville area.
The compressible layer was 4.0m down, and just below a thin hard layer
that was penetrated with the screw pile.
CLICK HERE for Larger Photographs

 

Copyright
 Website Design MagicFormulaMarketing.com